Mehrdad Aghaie Khafri

Journal Paper

1. ""
   Mehrdad Aghaie Khafri
   pp.85-89,
2. "Hot deformation of 15-5 PH stainless steel"
   Mehrdad Aghaie Khafri
   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.1052-1057,
3. "Hot formability of an Al Cu Mg Fe Ni forging disk"
   Mehrdad Aghaie Khafri
   JOM, pp.37-41,
4. "High temperature tensile behavior of a PH stainless steel"
   Mehrdad Aghaie Khafri
   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.4727-4732,
5. "Effect of standoff distance on interfacial characteristics and mechanical properties of Al/Cu MPW joints"
   Mehdi Pourabbas, Mehrdad Aghaie Khafri
   MATERIALS CHARACTERIZATION, Vol. 223, pp.114926-114926, 2025
6. "Effect of Chitosan Coating on Drug Carrier Capacity of Metal-organic Framework MIL-100(Fe) Contained Cyclophosphamide"
   Shabnam Tohidi, Mehrdad Aghaie Khafri, Mehdi Kadivar
   CURRENT MEDICINAL CHEMISTRY, Vol. 32, pp.3719-3733, 2025
7. "Role of Constitutive Modeling on the Analysis of Shear Localization in Semi-Solid Deformation"
   Mohammad Hadi Sheikhansari, Mehrdad Aghaie Khafri
   Iranian Journal of Materials Forming, Vol. 12, pp.4-14, 2025
8. "Synergistic exploration of nitrogen and cobalt-doped carbon cathodes for enhanced lithium-air batteries"
   Abolfazl Behravan, Mehrdad Aghaie Khafri
   Journal of Energy Storage, Vol. 93, pp.1-15, 2024
9. "A novel approach for facile synthesis of cost-optimal catalyst for high-performance lithium-air battery"
   Abolfazl Behravan, Mehrdad Aghaie Khafri
   Journal of Energy Storage, Vol. 86, 2024
10. "Cyclophosphamide Loading and Controlled Release in MIL-100(Fe) as an Anti-breast Cancer Carrier: In vivo In vitro Study"
    Shabnam Tohidi, Mehrdad Aghaie Khafri
    Current Drug Delivery, Vol. 30, pp.1-12, 2023
11. "Molecular dynamics simulation of hollow and porous amorphous silicon nanowires coated with amorphous aluminum oxide"
    Mohsen Barzegar Hedesh, Mehrdad Aghaie Khafri
    ELECTROCHIMICA ACTA, Vol. 468, pp.1-7, 2023
12. "Chitosan-Coated MIL-100(Fe) as an Anticancer Drug Carrier: Theoretical and Experimental Investigation"
    Shabnam Tohidi, Mehrdad Aghaie Khafri
    ACS Medicinal Chemistry Letters, Vol. 14, pp.1242-1249, 2023
13. "Amorphous alumina oxide coating to improve dimensional stability and efficiency of silicon energy storage anodes: Molecular dynamics simulation"
    Mohsen Barzegar Hedesh, Mehrdad Aghaie Khafri
    Sustainable Energy Technologies and Assessments, Vol. 60, pp.1-6, 2023
14. "on the High Temperature Compressive Flow Behavior of Mg-4Sn Magnesium Alloy"
    Ata Abdi, Mehrdad Aghaie Khafri
    Iranian Journal of Materials Science and Engineering, Vol. 19, pp.1-14, 2022
15. "Effect of Welding Processes on Texture and Anisotropy of HSLA Steel Sheet"
    Mahdi Golmohammadi, Mehrdad Aghaie Khafri
    Iranian Journal of Materials Forming, Vol. 9, pp.44-55, 2022
16. "An investigation on microstructure and mechanical properties of 316 stainless steel: a comparison between ultrasonic treatment and thermal annealing"
    Milad Zohrevand, Mehrdad Aghaie Khafri, Farnoosh Forouzan, Esa Vuorinen
    PHILOSOPHICAL MAGAZINE, Vol. 102, pp.1321-1343, 2022
17. "Processing of IN718/Ti-6Al-4V bimetallic joint using transient liquid phase bonding: effect of bonding temperature on the microstructure and mechanical properties"
    Behzad Binesh, Mehrdad Aghaie Khafri, Alireza Fayegh koloor
    PHILOSOPHICAL MAGAZINE, Vol. 102, pp.745-772, 2022
18. "Internal stress relief and microstructural evolution by ultrasonic treatment of austeno-ferritic 2205 duplex stainless steel"
    Milad Zohrevand, Mehrdad Aghaie Khafri, Farnoosh Forouzan, Esa Vuorinen
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 815, pp.141290-141301, 2021
19. "Softening mechanisms in ultrasonic treatment of deformed austenitic stainless steel"
    Milad Zohrevand, Mehrdad Aghaie Khafri, Farnoosh Forouzan, Esa Vuorinen
    ULTRASONICS, Vol. 116, pp.1-3, 2021
20. "Interfacial microstructure and mechanical properties of transient liquid phase bonded IN718/Ti-6Al-4V joints"
    Alireza Fayegh koloor, Mehrdad Aghaie Khafri, Behzad Binesh
    Welding in the World, Vol. 65, pp.1955-1968, 2021
21. "A significant toughness enhancement, and microstructural evolution of an electric resistance welded (ERW) microalloyed steel"
    S.H. Mousavi Anijdan, Mehrdad Aghaie Khafri, A.R. Khoshakhlagh, A.R. Eivani, Nokeun Park, H.R. Jafarian
    Journal of Materials Research and Technology-JMR and T, Vol. 15, pp.5776-5786, 2021
22. "Hot Workability and Processing Map of High Gd Content Mg-Gd-Zn-Zr-Nd Alloy"
    Sahar Mosadegh, Mehrdad Aghaie Khafri, Behzad Binesh
    Iranian Journal of Materials Forming, Vol. 8, pp.44-53, 2021
23. "Microstructural evolution and flow behaviour in hot compression of as-extruded Mg-Gd-Nd-Zn-Zr alloy"
    Sahar Mosadegh, Mehrdad Aghaie Khafri, Behzad Binesh
    PHILOSOPHICAL MAGAZINE, Vol. 101, pp.2473-2501, 2021
24. "Microstructural Evolutions under Ultrasonic Treatment in 304 and 316 Austenitic Stainless Steels: Impact of Stacking Fault Energy"
    Milad Zohrevand, Mehrdad Aghaie Khafri, Farnoosh Forouzan, Vuorinen Esa
    STEEL RESEARCH INTERNATIONAL, Vol. 92, pp.1-12, 2021
25. ""
    Valeh Talebsafa, Mehrdad Aghaie Khafri
    Amirkabir Journal of Mechanical Engineering, Vol. 52, pp.1-10, 2020
26. "Effect of Semi-solid Deformation on the Restoration Mechanisms and Texture Evolution in AA7075"
    Mohammad Hadi Sheikhansari, Mehrdad Aghaie Khafri
    JOM, Vol. 71, pp.4696-4704, 2019
27. "Constitutive modeling of semisolid deformation for the assessment of dilatant shear bands"
    Mohammad Hadi Sheikhansari, Mehrdad Aghaie Khafri
    APPLIED MATHEMATICAL MODELLING, Vol. 70, pp.128-138, 2019
28. "Study of Damage Propagation and Life Assessment in High Temperature Cyclic Loading"
    Ahmad Reza Mir, Mehrdad Aghaie Khafri
    Vol. 19, pp.731-742, 2019
29. "Nano-grain refinement and strengthening of copper under room temperature RUE process"
    Mehrdad Aghaie Khafri, Hashem Mousavi Anidjan, Meraj Ahmadi
    Scientia Iranica, Vol. 26, pp.445-454, 2019
30. "A New Criterion for Construction of Instability Maps in Hot Deformation"
    Omid Salari, Ata Abdi, Mehrdad Aghaie Khafri
    Materials Performance and Characterization, Vol. 8, pp.856-868, 2019
31. "An extension of Rice localization criterion to predict the onset of shear localization in semi-solid materials"
    Mohammad Hadi Sheikhansari, Mehrdad Aghaie Khafri
    International Journal of Material Forming, Vol. 12, pp.703-716, 2019
32. "Microstructural evolution and mechanical properties of thixoformed 7075 aluminum alloy prepared by conventional and new modified SIMA processes"
    Behzad Binesh, Mehrdad Aghaie Khafri, Mehdi Shaban, Ali Fardi-Ilkhchy
    International Journal of Materials Research, Vol. 109, pp.1122-1135, 2018
33. "A New Cellular Automaton Method Coupled with a Rate-dependent (CARD) Model for Predicting Dynamic Recrystallization Behavior"
    Mortaza Azarbarmas, Mehrdad Aghaie Khafri
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 49, pp.1916-1930, 2018
34. "An Enhanced Viscoplastic Constitutive Model for Semi-Solid Materials to Analyze Shear Localization"
    Mohammad Hadi Sheikhansari, Mehrdad Aghaie Khafri
    Journal of Solid Mechanics, Vol. 10, pp.894-901, 2018
35. "Shear localization in semi-solid deformation A bifurcation theory approach"
    Mohammad Hadi Sheikhansari, Mehrdad Aghaie Khafri
    MECHANICS RESEARCH COMMUNICATIONS, Vol. 89, pp.1-5, 2018
36. "Predicting flow localization in semi-solid deformation"
    Mohammad Hadi Sheikhansari, Mehrdad Aghaie Khafri
    International Journal of Material Forming, Vol. 11, pp.165-173, 2018
37. "Role of cube texture on toughness variation of electric resistance welded steel"
    , Mehrdad Aghaie Khafri, H.R. Jafarian, A.R. Khoshakhlagh
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, Vol. 23, pp.387-393, 2018
38. "A thermodynamic approach to analyze shear localization in semi-solid materials"
    Mohammad Hadi Sheikhansari, Mehrdad Aghaie Khafri
    CONTINUUM MECHANICS AND THERMODYNAMICS, Vol. 30, pp.805-815, 2018
39. ""
    Behzad Binesh, Mehrdad Aghaie Khafri, Mohamad Daneshi Kohani
    Vol. 17, pp.323-332, 2017
40. "Assessment of Poliak-Jonas criterion for the onset of dynamic recrystallization in semi-solid deformation"
    Mohammad Hadi Sheikhansari, Mehrdad Aghaie Khafri
    Materials Research Express, Vol. 4, pp.1-6, 2017
41. "Forging Optimization and Microstructural Simulation of an Inconel 718 Alloy Used in Turbine Discs"
    Seyyed Hashem Mousavi Anijdan, Mehrdad Aghaie Khafri, Vahid Joshaghani
    Journal of Applied Mathematics and Physics, Vol. 5, pp.1658-1667, 2017
42. "Dynamic recrystallization and texture modeling of IN718 superalloy"
    Mortaza Azarbarmas, Mehrdad Aghaie Khafri
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, Vol. 25, pp.1-24, 2017
43. "Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718"
    Mortaza Azarbarmas, Mehrdad Aghaie Khafri, Khoze Maria Cabrera, Jessica Calvo
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 678, pp.137-152, 2016
44. "Microstructural evolution and constitutive equations of Inconel 718 alloy under quasi-static and quasi-dynamic conditions"
    Mortaza Azarbarmas, Mehrdad Aghaie Khafri, Jose Maria Cabrera, Jesica Calvo
    MATERIALS and DESIGN, Vol. 94, pp.28-38, 2016
45. "RUE-based semi-solid processing Microstructure evolution and effective parameters"
    , Mehrdad Aghaie Khafri
    MATERIALS and DESIGN, Vol. 95, pp.268-286, 2016
46. "Phase Evolution and Mechanical Behavior of the Semi-Solid SIMA Processed 7075 Aluminum Alloy"
    , Mehrdad Aghaie Khafri
    Metals, Vol. 6, pp.1-23, 2016
47. "ON THE BEHAVIOR OF A ROTATING FUNCTIONALLY GRADED HYBRID CYLINDRICAL SHELL WITH IMPERFECT BONDING SUBJECTED TO HYGROTHERMAL CONDITION"
    Mahdi Saadatfar, Mehrdad Aghaie Khafri
    JOURNAL OF THERMAL STRESSES, Vol. 38, pp.854-881, 2015
48. "Microstructure and texture characterization of 7075 Al alloy during the SIMA process"
    Behzad Binesh, Mehrdad Aghaie Khafri
    MATERIALS CHARACTERIZATION, Vol. 106, pp.390-403, 2015
49. "Application of Case I and Case II of Hill s 1979 Yield criterion to predict FLD"
    Mehrdad Aghaie Khafri, Meisam Torabi noori
    Journal of Solid Mechanics, Vol. 7, pp.204-222, 2015
50. "Electromagnetothermoelastic behavior of a rotating imperfect hybrid functionally graded hollow cylinder"
    Mahdi Saadatfar, Mehrdad Aghaie Khafri
    Smart Structures and Systems, Vol. 15, pp.1411-1437, 2015
51. "On the Magneto-Thermo-Elastic Behavior of a Functionally Graded Cylindrical Shell with Pyroelectric Layers Featuring Interlaminar Bonding Imperfections Rested in an Elastic Foundation"
    Mahdi Saadatfar, Mehrdad Aghaie Khafri
    Journal of Solid Mechanics, Vol. 7, pp.344-363, 2015
52. "Optimization of Thermomechanical Parameters to Produce an Ultra-High Strength Compressor Disk"
    , Mehrdad Aghaie Khafri
    Iranian Journal of Materials Forming, Vol. 2, pp.54-61, 2015
53. "Hygrothermal analysis of a rotating smart exponentially graded cylindrical shell with imperfect bonding supported by an elastic foundation"
    Mahdi Saadatfar, Mehrdad Aghaie Khafri
    AEROSPACE SCIENCE AND TECHNOLOGY, Vol. 43, pp.37-50, 2015
54. "A new approach for modeling of streamlined die operations based on a non-quadratic stream function"
    Morteza Rejaeian, Mehrdad Aghaie Khafri
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 101, pp.376-386, 2015
55. "Thermoelastic analysis of a rotating functionally graded cylindrical shell with functionally graded sensor and actuator layers on an elastic foundation placed in a constant magnetic field"
    Mahdi Saadatfar, Mehrdad Aghaie Khafri
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 27, pp.512-527, 2015
56. "Hygrothermomagnetoelectroelastic analysis of a functionally graded magnetoelectroelastic hollow sphere resting on an elastic foundation"
    Mahdi Saadatfar, Mehrdad Aghaie Khafri
    Smart Materials and Structures, Vol. 23, pp.1-13, 2014
57. "Cold Work Simulation of Hole Expansion Process and Its Effect on Crack Closure"
    , Mehrdad Aghaie Khafri
    Iranian Journal of Materials Forming, Vol. 1.1, pp.11-23, 2014
58. "A Comparison Between Numerical and Analytical Modeling of ECAP"
    Morteza Rejaeian, Mehrdad Aghaie Khafri
    Iranian Journal of Materials Forming, Vol. 1, pp.56-63, 2014
59. ""
    , Mehrdad Aghaie Khafri
    Vol. 14, pp.54-64, 2014
60. "Producing Cr2O3 nanooxide from chromite concentrates"
    Mehrdad Aghaie Khafri, Shiva Navazani
    Micro and Nano Letters, Vol. 9, pp.351-354, 2014
61. "Quarter elliptical crack growth using three dimensional finite element method and crack closure technique"
    , Mehrdad Aghaie Khafri
    Journal of Mechanical Science and Technology, Vol. 28, pp.1-11, 2014
62. "Study of ECAP based on stream function"
    Morteza Rejaeian, Mehrdad Aghaie Khafri
    MECHANICS OF MATERIALS, Vol. 76, pp.27-34, 2014
63. "Optimization of gas tungsten arc welding process by response surface methodology"
    , Mehrdad Aghaie Khafri
    MATERIALS and DESIGN, Vol. 54, pp.25-31, 2013
64. "Hot Deformation Behavior of Ti 6Al 4V Alloy in b Phase Field and Low Strain Rate"
    Mehrdad Aghaie Khafri
    pp.13-20, 2013
65. "Investigation of Microstructure and Mechanical Properties of Ultra High Strength Bainitic Steel"
    Mehrdad Aghaie Khafri
    pp.77-81, 2013
66. "Fatigue Crack Growth Prediction of Elliptical Corner Crack using 3D FEM"
    Mehrdad Aghaie Khafri
    pp.469-474, 2013
67. "Effect of Compressive Residual Stress on the Corner Crack Growth"
    , Mehrdad Aghaie Khafri
    Journal of Solid Mechanics, Vol. 5, pp.324-335, 2013
68. "Synthesis of high speci c surface area Cr2O3 nanopowder"
    Mehrdad Aghaie Khafri
    pp.1072-1075, 2012
69. "Life Assessment and Life Extension of an Aircraft Wheel"
    Mehrdad Aghaie Khafri
    Advances in Mechanical Engineering, pp.1-6, 2012
70. "Finite element and arti cial neural network analysis of ECAP"
    Mehrdad Aghaie Khafri
    COMPUTATIONAL MATERIALS SCIENCE, pp.127-133, 2012
71. "A novel method to synthesize Crc203 nanopowders using EDTA as a chelating agent"
    Mehrdad Aghaie Khafri
    POWDER TECHNOLOGY, pp.152-159, 2012
72. "2D and 3D nite element analysis of crack growth under compressive residual stress field"
    Mehrdad Aghaie Khafri
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, pp.3316-3322, 2012
73. "The Study of an Al-Fe-Si Alloy After Equal-Channel Angular Pressing (ECAP) and Subsequent Semisolid"
    Mehrdad Aghaie Khafri
    JOM, pp.585-596, 2012
74. "Characterization of Grain Size and Yield Strength in AISI 301 Stainless Steel Using Ultrasonic Atten"
    Mehrdad Aghaie Khafri
    JOURNAL OF NONDESTRUCTIVE EVALUATION, pp.191-196, 2012
75. "A Study of Chromo-Boronizing on DIN 1 2714 Steel by Duplex Surface Treatment"
    Mehrdad Aghaie Khafri
    JOM, pp.694-701, 2012
76. "Study of Semisolid and ECAP Processes on Al-Fe-Si Alloy - Microstructure and Kinetic Grain growth"
    Mehrdad Aghaie Khafri
    DEFECT AND DIFFUSION FORUM, pp.166-171, 2011
77. "Influence of Heat Treatment on Properties of Hot Isostatically Pressed Turbine Blade Superalloy IN73"
    Mehrdad Aghaie Khafri
    Advanced Materials Research, pp.502-507, 2011
78. "Correlation between ultrasonic velocity and solutionising time in Rene 80 superalloy"
    Mehrdad Aghaie Khafri
    MATERIALS SCIENCE AND TECHNOLOGY, pp.1433-1435, 2011
79. "Life prediction of Ni-base superalloy"
    Mehrdad Aghaie Khafri
    BULLETIN OF MATERIALS SCIENCE, pp.305-309, 2011
80. "Creep behavior of MAR-M 302 Co-base superalloy"
    Mehrdad Aghaie Khafri
    JOURNAL OF MATERIALS SCIENCE, pp.3990-3997, 2010
81. "Creep Life Prediction of Thermally Exposed Rene 80 Superalloy"
    Mehrdad Aghaie Khafri
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, pp.1065-1070, 2010
82. "Low-cycle fatigue behavior of AA2618-T61 forged disk"
    Mehrdad Aghaie Khafri
    MATERIALS and DESIGN, pp.4104-4109, 2010
83. "Creep Degradation of Thermally Exposed IN738 Superalloy"
    Mehrdad Aghaie Khafri
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, pp.1-3, 2009
84. "Dynamic and metadynamic recrystallization of Hastelloy X superalloy"
    Mehrdad Aghaie Khafri
    JOURNAL OF MATERIALS SCIENCE, pp.3717-3724, 2008
85. "Forming behavior and workability of Hastelloy X superalloy during hot deformation"
    Mehrdad Aghaie Khafri
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.641-647, 2008
86. "Vanadium carbide coatings on die steel deposited by the thermo-reactive diffusion technique"
    Mehrdad Aghaie Khafri
    JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, pp.2465-2470, 2008
87. "Kinetics of V(N C) coating produced by a duplex surface treatment"
    Mehrdad Aghaie Khafri
    SURFACE and COATINGS TECHNOLOGY, pp.4107-4113, 2008
88. "The effect of thermal exposure on the properties of a Ni-base superalloy"
    Mehrdad Aghaie Khafri
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.388-393, 2008

Conference Paper

1. ""
   Mehrdad Aghaie Khafri
   بررسي ت ثير پارامترهاي عمليات ترمومكانيكي بر روي ريزساختار و خواص مكانيكي فولاد ميكروآلياژي واناديم,
2. ""
   Mehrdad Aghaie Khafri
   بررسي پارامترهاي مختلف پرس زاويه اي با مقاطع يكسان در آلياژ كارپذير آلومينيوم 2024 با بهره گيري از,
3. ""
   Mehrdad Aghaie Khafri
   بررسي تاثير پارامترهاي عمليات ترمومكانيكي بر روي ريز ساختار و خواص مكانيكي فولاد ميكروآلياژي واناديم,
4. ""
   Mehrdad Aghaie Khafri
   بهينه سازي و بررسي تاثير پارامترهاي فرايند جوشكاري الكترود تنگستني بر خواص مكانيكي فولاد كربني,
5. "5th International Conference on Science, Engineering Management and Information Technology, SEMIT 2025"
   Mahsa Fatemi mehranabi, Mehrdad Aghaie Khafri,
   Computational Modeling of Phase Transformation in 15-5PH Stainless Steel Under Rapid Induction Heating Using FEM-JMAK Framework, 2025
6. "Third Conference Technology development in mechanical and aerospace engineering"
   Vrya Mahmudi, Mehrdad Aghaie Khafri
   مدل سازي و پيش بيني رفتار سيلان آلياژ Mg-4Sn در تغيير شكل گرم توسط روش هاي شبكه مصنوعي و منطق فازي, 2020
7. "7th International Conference on Materials Engineering and Metallurgy"
   Ahmad Reza Mir, Mehrdad Aghaie Khafri
   بررسي خستگي دما بالاي فولاد زنگ نزن 420, 2018
8. "6th International Conference on Material Engineering and Metallurgy"
   Mahsa Fatemi mehranabi, Mehrdad Aghaie Khafri
   بررسي اثر گرمايش سريع به روش القايي بر استحاله هاي فازي فولاد مارتنزيتي 15-5 PH, 2017
9. "The 7th Conference on Computational Mechanics (CCM 2017)"
   Seid Hashem Mousavi Anijdan, Mehrdad Aghaie Khafri, Vahid Joshaghani
   Forging optimization and microstructural simulation of an Inconel 718 alloy used in turbine discs, 2017
10. "6th International conference on research in engineering science and technology"
    Behzad Binesh, Mehrdad Aghaie Khafri
    Response surface methodology for modelling of thixotropic microstructural characteristics of semi-solid 7075 alloy, 2017
11. ""
    ARASH KARDANI, Mehrdad Aghaie Khafri
    بررسي دقت عملكرد ترموستات در شبيه سازي مس نانوساختار با استفاده از محاسبات آماري, 2016
12. "8th Congress 3rd International Engineering Materials and Metallurgy Conference"
    Behzad Binesh, Mehrdad Aghaie Khafri
    تهيه شمش نيمه جامد آلياژ آلومينيوم 7075 با استفاده از روش سيما SIMA, 2014
13. "8th Congress 3rd International Engineering Materials and Metallurgy Conference"
    Mehrdad Aghaie Khafri
    بهبود شكل پذيري با عمليات ترمومكانيكي, 2014
14. "The Second International and the Seventh Joint Conference of Iranian Metallurgical Engineering and Iranian Foundrymen Scientific Societies"
    Morteza Rejaeian, Mehrdad Aghaie Khafri
    Investigation of strain strain inhomogeneity and required force in ECAP with square cross, 2013
15. "21st Annual International Conference on Mechanical Engineering"
    Mehrdad Aghaie Khafri, Mahdi Saadatfar
    حل تحليلي تنش در استوانه هوشمند تابعي متشكل از ماده تابعي و لايه هاي پيزوالكتريك تابعي تحت بار حرارتي الكتريكي مكانيكي, 2013
16. ""
    Mehrdad Aghaie Khafri
    افزايش عمر سايشي قالبهاي آهنگري با پوشش كاربيدي, 2012
17. ""
    Mehrdad Aghaie Khafri
    بهينه سازي LDR و پديده گوشه اي شدن در فرايند كشش عميق, 2012
18. ""
    Mehrdad Aghaie Khafri
    Preparin High Purity nano-sized Cr2O3, 2011
19. ""
    Mehrdad Aghaie Khafri
    INVESTIGATION OF EFFECTS OF SINGLE OVERLOAD/UNDERLOAD ON CRACK OPENING LOAD VALUES, 2011
20. ""
    Mehrdad Aghaie Khafri
    Evaluation of chromium boride layers formed on DIN 1 2714 steel by Duplex Surface Treatment, 2011
21. ""
    Mehrdad Aghaie Khafri
    SIMPLE METHOD FOR PREPARING HIGH PURITY CR2O3 NANO OXIDE, 2011
22. ""
    Mehrdad Aghaie Khafri
    مقايسه ي روش هاي مختلف آستمپرينگ جهت بهبود خواص مكانيكي فولاد فوق مستحكم 6305, 2011
23. ""
    Mehrdad Aghaie Khafri
    IMPROVEMENT OF MECHANICAL PROPERTIES AND MICROSTRUCTURE OF Al-Fe-Si ALLOY BY ECAP SEMISOLIDED METHOD, 2010
24. ""
    Mehrdad Aghaie Khafri
    THE EFFECTS OF AUSFORMING ON THE PRECIPITATING PROCESS AND MECHANICAL PROPERTIES OF 17-4PH STAINLESS, 2010
25. ""
    Mehrdad Aghaie Khafri
    DAMAGE TOLERANCE ANALYSIS OF JET ENGINE COMPRESSOR DISK USING FEM, 2010
26. ""
    Mehrdad Aghaie Khafri
    Synthesis and characterization of chromium oxide nanocrystalsby amorphouscomplex method using chelat, 2010
27. ""
    Mehrdad Aghaie Khafri
    Study of Semisolid and ECAP Processes on Al-Fe-Si Alloy - Microstructure and Kinetic Grain growth, 2010
28. ""
    Mehrdad Aghaie Khafri
    بهبود خواص مكانيكي فولاد زنگ نزن 17-4PH با استفاده از عمليات ترمومكانيكال, 2010
29. ""
    Mehrdad Aghaie Khafri
    اثر فرآيند ECAP و SEMISOLID بر روي ريز ساختار و خواص مكانيكي آلومينيوم, 2010
30. ""
    Mehrdad Aghaie Khafri
    بهبود خواص مكانيكي پره كمپرسور هواپيما از جنس فولاد زنگ نزن 17-4 PH با استفاده از سيكلهاي عمليات حرا, 2010
31. ""
    Mehrdad Aghaie Khafri
    تاثيردرصد تغيير شكل و شرايط عمليات حرارتي در فرايند SIMA بر روي ريزساختار و خواص مكانيكي آلياژ 6061, 2009
32. ""
    Mehrdad Aghaie Khafri
    A Method for Life Assessment of Ni-Base Superalloy, 2009
33. ""
    Mehrdad Aghaie Khafri
    بررسي تغييرشكل گرم فولاد زنگ نزن رسوب سختي شونده Ni5-Cr15 و تعيين پارامترهاي بهينه فرايند, 2009
34. ""
    Mehrdad Aghaie Khafri
    مدلسازي سينتيك تبلور مجدد ديناميكي در آلياژ Ti-6Al-4V با استفاده از رابط اورامي, 2009
35. ""
    Mehrdad Aghaie Khafri
    بررسي و مقايس روابط سينتيكي مختلف براي تبلور مجدد ديناميكي آلياژ Ti-6Al-4V, 2008
36. ""
    Mehrdad Aghaie Khafri
    بررسي سينتيك تغيير شكل داغ آلياژ Ti-6Al-4V در محدود فازي, 2008
37. ""
    Mehrdad Aghaie Khafri
    بررسي سينتيك تغييرشكل گرم فولاد زنگ نزن PH 5- 15 با بكارگيري معادله آرنيوس و انرژي اكتيواسيون, 2008
38. ""
    Mehrdad Aghaie Khafri
    تاثير عمليات حرارتي بلند مدت بر خصوصيات و رفتار خزشي سوپرآلياژIN-738, 2008
39. ""
    Mehrdad Aghaie Khafri
    بررسي تاثير عمليات حرارتي بر روي ريزساختار سوپرآلياژ پايه كبالت 302 MAR-M, 2008
40. ""
    Mehrdad Aghaie Khafri
    خواص تريبولوژيكي پوششهاي سراميكي كاربيد واناديم, 2008
41. ""
    Mehrdad Aghaie Khafri
    اثرفشارهيدروستاتيك گرم (HIP) وعمليات حرارتي پس ازآن روي ميكروساختارپره توربين گازي كاركرده پايه نيكل, 2008
42. "The 7th Conference of Iranian Aerospace Society"
    Mehrdad Aghaie Khafri
    مطالعه مكانيزم تشكيل پوشش آلومينايد نفوذي اصلاح شده, 2008
43. "The 7th Conference of Iranian Aerospace Society"
    Mehrdad Aghaie Khafri
    بررسي رفتار تنش-كرنش سيكلي دما بالاي آلياژ PH5-15, 2008
44. ""
    Mehrdad Aghaie Khafri
    خواص خستگي كم چرخه آلياژ PH 15-5 در دمايC 300, 2007
45. ""
    Mehrdad Aghaie Khafri
    تاثير عمليات پيركردن بر خواص كششي فولادهاي زنگ نزن PH 15-5،, 2007
46. ""
    Mehrdad Aghaie Khafri
    تعيين سيكل بهينه فشار ايزواستاتيك گرم و اثر آن بر روي خواص مكانيكي سوپرآلياژ پايه نيكل Rene80, 2007
47. ""
    Mehrdad Aghaie Khafri
    رفتار تنش كرنش سيكلي آلياژ AA2618 تحت خستگي كم چرخه در دماي 200C, 2007
48. ""
    Mehrdad Aghaie Khafri
    تحليل و بررسي رفتار ترموديناميكي شكل دهي داغ سوپرآلياژ پايه نيكل, 2007
49. ""
    Mehrdad Aghaie Khafri
    تاثير عمليات پيركردن بر خواص مكانيكي فولادهاي زنگ نزن PH 15-5, 2007
50. ""
    Mehrdad Aghaie Khafri
    تعيين سيكل بهينه فرآيند فشار هيدرواستاتيك گرم (HIP) و اثر آن بر روي ريزساختار سوپرآلياژ پايه نيكل 80, 2007
51. ""
    Mehrdad Aghaie Khafri
    بررسي اثر ضخامت و عمليات حرارتي بر روي فرايند كشش عميق ورق آلومينيومي 2618, 2007
52. ""
    Mehrdad Aghaie Khafri
    بررسي رفتار تغييرشكل سيكلي آلياژ PH 15-5 تحت خستگي كم چرخه در دماي 300 درجه, 2007
53. ""
    Mehrdad Aghaie Khafri
    تاثير عمليات حرارتي بر روي ريز ساختار و خواص مكانيكي سوپرآلياژ HIP شده Rene-80, 2007
54. ""
    Mehrdad Aghaie Khafri
    تاثير فرآيند پير كردن بر رفتار خزشي فولادهاي زنگ نزن 15-5PH, 2007
55. ""
    Mehrdad Aghaie Khafri
    بررسي كارپذيري و اندازه دانه سوپرآلياژ پايه نيكل در دماها و سرعت كرنشهاي مختلف, 2007
56. ""
    Mehrdad Aghaie Khafri
    بررسي رفتار خستگي كم چرخه دما بالاي آلياژ AA 2618, 2007