Majid Seyedsalehi

Journal Paper

1. "Flow behavior and processing map of newly developed ECO-AlMag8 alloy during hot compression"
   Majid Seyedsalehi, Ali Sonboli, Nam Seok Kim, Bong Hwan Kim, Shae Kwang Kim, Ghasem Eisaabadi B.
   Results in Engineering, Vol. 26, 2025
2. "Probabilistic cellular automata simulation of microstructure evolution: the role of model parameters on precision and uncertainty"
   Majid Seyedsalehi
   MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, Vol. 33, 2025
3. "Effect of material properties on femoral artery SMA stent performance: a numerical evaluation"
   F. Nematzadeh, M. Zolfaghari, Majid Seyedsalehi, S. K. Sadrnezhaad
   ARCHIVE OF APPLIED MECHANICS, Vol. 95, 2025
4. "Dislocation-Based Finite Element Modeling of an Off-Axis Twist Extrusion with Variable Helix Angles"
   Moein Barkhordari, Majid Seyedsalehi
   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024
5. "Microstructure-induced anisotropic tribological properties of Sc-Zr modified Al-Mg alloy (Scalmalloy®)produced via laser powder bed fusion process"
   Ata Abdi, Majid Seyedsalehi, , Luca Iuliano, Abdollah Saboori
   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 130, pp.755-779, 2023
6. "Ti6Al4V Bone Implants: Effect of Laser Shock Peening on Physical, Mechanical, and Biological Properties"
   Meisam Bakhtiari, Alireza Fayazi Khanigi, Majid Seyedsalehi, Amirreza Farnia
   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023
7. "Effect of Cr elimination on flow behavior and processing map of newly developed ECO-7175 aluminum alloy during hot compression"
   Majid Seyedsalehi, Bong Hwan KIM, Seung Yoon YANG, Shae Kwang KIM, Ghasem EISAABADI BOZCHALOEI
   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 32, pp.1442-1459, 2022
8. ""
   Fardin Nematzadeh, Hosein Mostaan, Majid Seyedsalehi
   Vol. 52, pp.233-239, 2022
9. "A modified cellular automata model for simulation of non-isothermal static recrystallization: a case study on pure copper annealing"
   Mitra Madani, Majid Seyedsalehi
   APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING, Vol. 128, 2022
10. ""
    Fardin Nematzadeh, Seyed Khatiboleslam Sadrnezhaad, Majid Seyedsalehi
    pp.13-21, 2022
11. "Microstructural evolutions of newly developed ECO-7175 aluminum alloy during hot compression: The effect of Cr elimination"
    Bong Hwan Kim, Majid Seyedsalehi, Shae Kwang Kim, Mohammad Sadegh Mohebbi, Ghasem Eisaabadi Bozchaloei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 792, pp.1-23, 2020
12. "Role of Ca in hot compression behavior and microstructural stability of AlMg5 alloy during homogenization"
    Bong Huang KIM, Majid Seyedsalehi, Ashkan NOURI, Mohammad Sadegh MOHEBI, Seong Ho HA, Young Ok YOON, Hyun Kyu LIM, Shae K. KIM, B. Ghasem EISAABADI
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 30, pp.571-581, 2020
13. "Study of Geometrically Necessary Dislocations of a Partially Recrystallized Aluminum Alloy Using 2D EBSD"
    Majid Seyedsalehi, Nozar Anjabin, Hyoung Seop Kim
    MICROSCOPY AND MICROANALYSIS, Vol. 25, pp.1-8, 2019
14. "Dissolution Kinetics of Spheroidal-Shaped Precipitates in Age-Hardenable Aluminum Alloys"
    Nozar Anjabin, Majid Seyedsalehi
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 49, pp.3584-3591, 2018
15. "Reconstruction of deformed microstructure using cellular automata method"
    Meisam Bakhtiari, Majid Seyedsalehi
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 149, pp.1-13, 2018
16. "A new model for the time delay between elastic and plastic wave fronts in shock waves propagating in solids"
    Mohammad Hallajisany, Jamal Zamani, Majid Seyedsalehi, Jose Albelda Vitoria
    SHOCK WAVES, Vol. 27, pp.55-89, 2018
17. "A new model for the time delay between elastic and plastic wave fronts for shock waves propagating in solids"
    Mohammad Hallajisany, Jamal Zamani, Majid Seyedsalehi, J. Albelda Vitoria
    SHOCK WAVES, Vol. 27, 2018
18. "Modeling and experimental study of static recovery and mechanical behavior of AA5052 alloy during cold-working and subsequent annealing"
    Majid Seyedsalehi, Nozar Anjabin
    Iranian Journal of Materials Forming, Vol. 4, pp.28-38, 2017
19. "Intense Shock Wave Model in Crystalline Solid Materials Having Low Yield Stress"
    Mohammad Hallajisany, Jamal Zamani, Majid Seyedsalehi, José Albelda Vitoria
    Vol. 11, pp.39-52, 2016
20. "A Comprehensive Study on Using VTBN Reactive Oligomer for Rubber Toughening of Epoxy Resin and Composite"
    A. Fakhar, Majid Seyedsalehi, M. Keivani, M. Abadyan
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, Vol. 55, pp.1-52, 2015
21. "Hot Deformation Behavior of Ni80A Superalloy During Non-Isothermal Side Pressing"
    Majid Seyedsalehi, Nozar Anjabin, Roozbeh Mansoori
    Iranian Journal of Materials Forming, Vol. 2, pp.18-29, 2015
22. "An upper bound solution for twist extrusion process"
    Majid Seyedsalehi, Nozar Anjabin, Hyeong Seop kim
    METALS AND MATERIALS INTERNATIONAL, Vol. 20, pp.825-834, 2014

Conference Paper

1. "The 12th international conference on materials science & metallurgical engineering"
   Meisam Bakhtiari, Majid Seyedsalehi, Masood Ghermezi, Alireza Fayazi
   بررسي عددي اثر شوك دهي ليزري بر روي تنش پسماند در هندسه منحني سوپرآلياژ Rene 80, 2023
2. "The 12th international conference on materials science & metallurgical engineering"
   Zahra Fallah Mohammadi, Masoud Mahmoudvand, Majid Seyedsalehi
   مدل سازي جوشكاري ليزر آلياژ Ti6Al4V, 2023
3. "The 12th international conference on materials science & metallurgical engineering"
   Masoud Mahmoudvand, Zahra Fallah Mohammadi, Majid Seyedsalehi
   شبيه سازي انتقال حرارت پوشش دهي ليزري آلياژ پايه تيتانيوم, 2023
4. "16th student scientific conference on Iranian materials and metallurgical engineering"
   Ayda Asaadi Zahraei, Majid Seyedsalehi
   شبيه سازي تحولات ريزساختاري حين آنيل هم دما آلياژ آلومينيوم- منيزيم AA5052 به روش اتوماسيون سلولي, 2019
5. "11th Iranian light Source Facility Users' Meeting"
   Mehdi Khodaei, Majid Seyedsalehi, Oriol Vallcorba, Fauth Francois
   Residual stress measurement in thermal barrier coatings of turbine blades by synchrotron X-ray deconvolution method as a nondestructive analysis, 2019
6. "7th International Conference on Materials Engineering and Metallurgy"
   Meisam Bakhtiari, Majid Seyedsalehi
   مدلسازي ريزساختار تبلورمجدد استاتيكي حين آنيل غيرهمدما با استفاده از روش اتوماسيون سلولي و روش اجزاي محدود, 2018
7. "7th International Conference on Materials Engineering and Metallurgy"
   Aida Nikbakht, Majid Seyedsalehi
   بررسي رشد دانه در سوپرآلياژ پايه نيكل, 2018
8. "26th Annual International Conference of Iranian Society of Mechanical Engineering"
   Fardin Nemat zadeh, Hosein Mostaan, Majid Seyedsalehi
   مقايسه رفتار مكانيكي و كلينيكي دو نوع استنت از جنس آلياژهاي حافظه دار جهت كاربرد در عروق پا, 2018
9. "26th Annual International Conference of Iranian Society of Mechanical Engineering"
   Fardin Nemat zadeh, hosein mostaan, Majid Seyedsalehi
   بررسي رفتار مكانيكي استنت هاي هوشمند جهت استفاده در عروق پا, 2018
10. "7th international conference of chemistry, metallurgy and materials engineering"
    Meisam Bakhtiari, Majid Seyedsalehi
    مدل سازي ريزساختار تغييرشكل يافته با استفاده از روش اتوماسيون سلولي و اجزاي محدود, 2018
11. "7th international conference of chemistry, metallurgy and materials engineering"
    Maryam Hojati fahim, Majid Seyedsalehi
    پيش بيني استحاله هاي فازي در سوپرآلياژهاي پايه نيكل با استفاده از روش CALPHAD, 2018
12. "PARTICLE-BASED MATERIALS SYMPOSIUM"
    Majid Seyedsalehi, Alireza Mohammad gholizadeh, Mehdi Khodaei
    Effect of SiC nanoparticle on corrosion behaviour of Ni-P electroless coatings, 2017
13. "6th International Conference on Material Engineering and Metallurgy"
    Hadi Eslami, Majid Seyedsalehi
    Simulation of hot forging process of gas turbine blade of Nickel-based superalloy Nimonic 80A, 2017
14. "6th International Conference on Material Engineering and Metallurgy"
    Moein Barkhordari, Majid Seyedsalehi
    Modeling of severe plastic deformation by twist extrusion method with off center circular die cross-section, 2017
15. ""
    Meisam Bakhtiari, Majid Seyedsalehi
    Simulation of static recrystallization of Nimonic 80A superalloy in isothermal annealing by coupling a cellular automata and finite element method, 2016
16. ""
    Majid Seyedsalehi
    Reconstruction of crystallographic orientation of grains in microstructural simulation, 2016